SDS

Date Printed: 4/21/2016
P241 Use explosion-proof electrical/ventilating/lighting/equipment.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P363 Wash contaminated clothing before reuse.
3. Composition/Information On Ingredients
HAZARDOUS SUBSTANCES
Chemical Name CAS-No. Wt.%
Range
GHS Symbols
GHS Statements
Hexamethylene Diisocyanate Polymer 28182-81-2 75-100 GHS07-GHS08 H317-332-334-335
n-Butyl Acetate 123-86-4 2.5-10 GHS02-GHS07 H226-336
Solvent Naphtha, Light Aromatic 64742-95-6 2.5-10 GHS07-GHS08 H304-332
Hexamethylene Diisocyanate 822-06-0 0.1-1.0 GHS06-GHS08 H311-315-317-319-330-334-335
4. First-aid Measures
FIRST AID - EYE CONTACT: Immediately flush eyes with plenty of water for at least 15 minutes holding eyelids open. Get medical
attention. Do NOT allow rubbing of eyes or keeping eyes closed. If exposed to fumes or vapors, flush eyes with plenty of water for at
least 15 minutes. Get medical attention.
FIRST AID - SKIN CONTACT: Wash skin with soap and water. Remove contaminated clothing. Get medical attention if irritation
develops or persists. Wash contaminated clothing and decontaminate footwear before reuse.
FIRST AID - INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get
immediate medical attention. Do NOT use mouth-to-mouth resuscitation. If you experience difficulty in breathing, leave the area to
obtain fresh air. If continued difficulty is experienced, get medical assistance immediately.
FIRST AID - INGESTION: If swallowed, do not induce vomiting. If victim is conscious and alert, give 2 to 4 cupfuls of water or milk.
Call a physician or poison control center immediately. Never give anything by mouth to an unconscious person. Treat
symptomatically and supportively. If swallowed, get medical attention.
5. Fire-fighting Measures
EXTINGUISHING MEDIA: Alcohol Film Forming Foam, Carbon Dioxide, Dry Chemical, Dry Sand
UNUSUAL FIRE AND EXPLOSION HAZARDS: Closed containers may explode when exposed to extreme heat due to buildup of
steam. Keep containers tightly closed. Combustible liquid and vapor. THIS IS A FAST-CURE POLYURETHANE COATING. When
used in spray finish applications, follow all requirements of OSHA's standard:Spray Finishing Using Flammable and Combustible
Liquids, 29 CFR 1910.107. All spray areas should be kept free from accumulation of deposits of combustible residues as practical,
with cleaning and filter change-out conducted daily. All discarded filter pads and filter rolls should be immediately removed to a safe,
well-detached location to fully cure prior to disposal or placed in a water-filled metal container and disposed of at the close of the
day's operation. No unusual fire or explosion hazards noted.
SPECIAL FIREFIGHTING PROCEDURES: Full protective equipment including self-contained breathing apparatus should be used.
Evacuate area and fight fire from a safe distance. Use water spray to keep fire-exposed containers cool. Containers may explode
when heated.
6. Accidental Release Measures
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: Isolate the hazard area and deny entry to unnecessary and
unprotected personnel. Remove all sources of ignition, ventilate area and remove with inert absorbent and non-sparking tools.
Dispose of according to local, state (provincial) and federal regulations. Do not incinerate closed containers.
7. Handling and Storage
Page 2 / 5