Manualshelf

Technical Specifications

ManualsBrandsRust-Oleum ManualsInterior Paint & StainHigh Performance 9100 System Low-Temp DTM Epoxy Mastic Activator - 1 gal.
12345
EPOXY
TECHNICAL DATA
RO-139
HIGH PERFORMANCE
9100 SYSTEM DTM EPOXY MASTIC
1
DESCRIPTION AND USES
The 9100 System DTM Epoxy Mastic is a two-component, high
solids epoxy coating for use in moderate to severe environments.
It is specifically designed for application directly on sound rusted
steel with minimum surface preparation. It can also be used on
clean steel, galvanized metal, concrete (including concrete
floors), previously coated and slightly damp surfaces. It may also
be used for water immersion service, using the DTM Epoxy
Mastic standard premix bases only with the Immersion Activator.
(Note: Not use for immersion service in potable water tanks).
The 9100 System is available in 340 and 250 g/l VOC versions.
If a satin finish is desired, use the Satin Finish Standard Activator.
This coating complies with USDA FSIS regulatory sanitation
performance standards for food establishment facilities. This
coating is impervious to moisture and easily cleaned and
sanitized.
Note: The Immersion Activator and the Fast-Cure Activator
produce a semi-gloss finish. Also, using the Fast-Cure Activator
may result with a slight color shift when compared with products
using the Standard Activator.
This DTM Epoxy Mastic can be used indoors or out. Epoxy
coatings will yellow with age. This is most noticeable with interior
applications of white or light colors which are not subjected to
bleaching from sunlight. Exterior exposure over time will cause
fading and chalking with all epoxy type coatings. These changes
are cosmetic in nature only and film integrity and performance will
not be adversely affected.
MPI #98 Certified. Refer to the MPI website for the most current
listing of MPI certified products.
PRODUCTS
BASE COMPONENT
1 Gallon
5 Gallons
DESCRIPTION
9115402
2
-----
Aluminum (Semi-Gloss)
9122402
-----
Marlin Blue
9145402
-----
Equipment Yellow
9165402
-----
Regal Red
9168402
-----
Tile Red
9171402
9171300
Dunes Tan
9179402
-----
Black
9182402
9182300
Silver Gray
9186402
9186300
Navy Gray
9192402
-----
White
266693
266697
Buff
9125402
-----
Safety Blue
9133402
-----
Safety Green
9144402
9144300
3
Safety Yellow
PRODUCTS (cont.)
BASE COMPONENT (cont.)
1 Gallon
5 Gallons
DESCRIPTION
204005
297081
Safety Orange
204006
297079
Safety Red
323759
-----
Cafe
NOTE:
Agriculture Canada accepted: 9115, 9145, 9165, 9171,
9179, 9186, 9192 and 9101.
TINT BASES
1 Gallon
5 Gallons
DESCRIPTION
9105405
-----
Red
9106405
-----
Yellow
9107405
9107375
3
Masstone
9108421
9108381
Deep
9109408
9109388
Light
TINTING
The 9100 System tint bases can be tinted with Rust-Oleum 2020
Colorants or Evonik colorants. Tint should not be added to
Activators.
TINT BASE MAXIMUM COLORANT PER 2 GALLON KIT
QUANTITY
TINT BASE DESCRIPTION
32 Oz.
Red
32 Oz
Yellow
32 Oz.
Masstone
24 Oz.
Deep
16 Oz.
Light
ACTIVATOR
1 Gallon
5 Gallons
DESCRIPTION (340 VOC g/l)
9101402
9101300
Standard Gloss
9102402
4
9102300
4
Immersion Semi-Gloss
9104402
4
A910008300
4
Fast Cure Semi-Gloss
1 Gallon
5 Gallons
DESCRIPTION (250 VOC g/l)
205015
206232
Standard Gloss
214430
4
-----
Immersion Semi-Gloss
9103402
9103300
Low Temp Gloss
214432
4
-----
Fast Cure Semi-Gloss
331254
-----
Standard Satin
2
The 9115 Aluminum is not recommended to be used in water
immersion, as a floor finish, or as a prime coat for any finish other
than itself.
3
Made-to-Order only. Contact Rust-Oleum Customer Service for
details
4
Not for use with tint bases.

Summary of content (5 pages)