How to Guide

TECHNICAL DATA
AMERICAN ACCENTS CRACKLE SPRAYS
Rust-Oleum Corporation Form: GDH-189
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 041516
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
CRACKLE SPRAYS
Resin Type
Base Coat – Nitrocellulose, Topcoat – Acrylic Lacquer
Pigment Type
Varies with color
MIR
1.2 Max
Fill Weight
12 ounces
Solvents
Acetone, Toluene, Xylene
Recommended Dry Film
Thickness (DFT) per Coat
1.5-2.5mils
(37.5-62.5µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
7-10 sq.ft./can
(0.64-0.91m
2
/can)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
15 minutes
Handle
30 minutes
Recoat
30 minutes between base coats; 1 hour before topcoat
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we can
guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All technical
information is subject to change without notice.