Technical Specifications

ManualsBrandsRust-Oleum ManualsAll-Purpose Spray PaintStops Rust® Gloss Black Protective Enamel Spray Paint - 12 oz

TECHNICAL

DATA SRT-01

STOPS

RUST

ENAMEL SPRAYS

.DESCRIPTION AND USES .

Rust-Oleum

Stops Rust

Enamel Sprays are

designed

provide

durable protective coating with excellent rust prevention, and

excellent

resistance

abrasion, fading,

chipping, and dulling. These sprays

apply easily, provide excellent coverage and dry fast to a

tough

attractive

finish. Rust-Oleum

Stops Rust

Enamel Sprays are ideal

for ferrous, non-ferrous metal and wood surfaces. It features a

comfort tip with a

wider

finger pad

to reduce fatigue

caused by

continuous spraying and an any-angle tip which allow s you to spray

at any angle. Not for use on galvanized metal.

. .

.PAINTING CONDITIONS .

Use outdoors or in a well ventilated area such as an open

garage. Use when temperature is between 50°F (10°C) and

90°F (32°C) and humidity is below 65% to ensure proper

drying. Do not apply to surfaces, when heated, exceed 200°F

(93°C). Do not apply to galvanized st eel. Avoid spraying in

very windy and dusty conditions. Cover surrounding area to

protect fr om spray mist

..PRODUCT APPLICATION .

SURFACE PREP AR ATION

Remove all dirt, grease, oil, s alt and chemical contaminants by

washing the surface with a commercial detergent, or other

suitable cleaning method. Rins e with fresh water and allow to

thoroughly dry. Remove loose paint and rust with a wire brush

or sandpaper. Previously coated surfaces must be sound and

in good condition. Smooth, hard, or glossy finishes s hould be

scarified by sanding to create a surface profile. WARNING! If

you scrape, sand, or remove old paint, you may release lead

dust. LEAD IS TOXIC. Contact the U.S.EPA/Lead Information

Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

PRIMING

Use of a Rust-Oleum

primer provides added c orrosion

protection, excellent adhesion and hiding and is especially

recommended for bare wood and metal. The f ollowing primers

are recommended.

Form:

CS1281

Rev.:

082212

Summary of content (3 pages)

PAGE 1
TECHNICAL DATA SRT-01 STOPS RUST ENAMEL SPRAYS .DESCRIPTION AND USES .PAINTING CONDITIONS . . Use outdoors or in a well ventilated area such as an open Rust-Oleum® Stops Rust® Enamel Sprays are designed to provide a durable protective coating with excellent rust prevention, and excellent resistance to abrasion, fading, chipping, and dulling. These sprays apply easily, provide excellent coverage and dry fast to a tough attractive finish. Rust-Oleum® Stops Rust® Enamel Sprays are ideal garage.
PAGE 2
TECHNICAL DATA STOPS RUST ENAMEL SPRAYS ..PRODUCT APPLICATION (cont.) APPLICATION Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Hold c an 10-16" from the surface and spray in a steady back-and-f orth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying.
PAGE 3
TECHNICAL DATA STOPS RUST ENAMEL SPRAYS PHYSICAL PROPERTIES . FINISHES Resin Type Oil modified alkyd Pigment Type Varies with color Xylene, aliphatic hydr ocarbons MIR Fill Weight 1.4 Max Solvents 12 ounces Recommended Dry Fil m Thickness (DFT) Per Coat Acetone, Toluene, Xylene Practical Coverage at Recommended 10-12 sq. ft./can DFT (assumes 15% material loss) (0.9-1.09 m /can) Dry Times at 70-80°F (21-27°C) and 50% rel. hum.