Manualshelf

Technical Specifications

ManualsBrandsRust-Oleum ManualsExterior Oil-Based PaintSpecialty BBQ Black High-Heat Paint - 1/2 pt
12
TECHNICAL DATA
SPECIALTY HIGH HEAT
Rust-Oleum Corporation Form: GDH-856
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 070517
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
Sprays
Brush Goods
Low VOC
Resin Type
Modified Silicone
Silicone Modified Alkyd
Silicon Modified Alkyd
Pigment Type
Black Manganese Ferrite,
Chromite Black
Black Manganese Ferrite,
Chromite Black
Black Manganese Ferrite,
Chromite Black
Solvents
Acetone, Aromatic
Hydrocarbons
Aromatic Mineral Spirits
Aromatic Mineral Spirits
Fill Weight
12 ounces
NA
NA
MIR
1.85 Max
NA
NA
Weight
Per Gallon
NA
9.8 lbs./gal
10.9 lbs./gal
Per Liter
NA
1.17 kg
1.30 kg
Solids
By Weight
NA
59.2%
67.9%
By Volume
NA
38.1%
45.5%
Volatile Organic Compounds
NA
475 g/l (3.9 lbs./gal.)
420 g/l (3.5 lbs./gal.)
Recommended Dry Film Thickness
(DFT) per Coat
1.0-2.0 mils
(25-50µ)
1.0-2.0 mils
(25-50µ)
1.0-2.0 mils
(25-50µ)
Wet Film to Achieve DFT
(unthinned material)
NA
2.5-5.0 mils
(62.5-125µ)
2.0-4.5 mils
(50-112.5µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
7-8 sq.ft./can
(0.63-0.72 m
2
/can)
260-520 sq.ft./gal.
(6.4-12.8 m
2
/l)
310-620 sq.ft./gal.
(7.6-15.3 m
2
/l)
Touch
30 minutes
2-4 hours
2-4 hours
Handle
1-2 hours
5-9 hours
5-9 hours
Recoat
Within 1 hour or
after 48 hours
NA
NA
Full Cure
Allow paint to dry 1 hour
then heat cure @ 450ºF
(230ºC) for 1 hour
Allow paint to dry 24 hours
before heating
Allow paint to dry 24 hours
before heating
Dry Heat Resistance
1200°F (648°C)
1200°F (648°C)
1200°F (648°C)
Shelf Life
5 years
5 years
5 years
Flash Point
-156°F (-104°C)
104°F (40°C)
104°F (40°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.