How to Guide

TECHNICAL DATA
PROFESSIONAL DTM ALKYD ENAMEL (450 VOC)
Rust-Oleum Corporation Form: GDH-762
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 040715
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
DTM ALKYD ENAMEL 450 VOC FINISHES
Resin Type
Modified Alkyd
Pigment Type
Varies with color
Solvents
Aliphatic hydrocarbons
Weight
Per Gallon
7.6-8.9 lbs.
Per Liter
0.9-1.1 kg
Solids
By Weight
51-59%
By Volume
42-43%
Volatile Organic Compounds
<450 g/l (3.75 lbs./gal.)
Recommended Dry Film Thickness
(DFT) Per Coat
1.5-2.5 mils
(37.5-62.5µ)
Wet Film to Achieve DFT (unthinned
material)
3.5-6.0 mils
(87.5-150µ)
Theoretical Coverage at 1 mil DFT
(25µ)
675-690 sq.ft./gal.
(16.6-17.0 m
2
/l)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
230-390 sq.ft./gal.
(5.7-9.6 m
2
/l)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
2-4 hours
Handle
5-10 hours
Recoat
24 hours
Dry Heat Resistance
212°F (100°C)
Shelf Life
5 years
Flash Point
104°F (93°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.