How to Guide

TECHNICAL DATA
STOPS RUST
®
CRYSTAL CLEAR ENAMEL SPRAY
Rust-Oleum Corporation Form: GDH-923
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 082615
Vernon Hills, Illinois 60061 www.rustoleum.com
PHYSICAL PROPERTIES .
CRYSTAL CLEAR ENAMEL SPRAY
Resin Type
Acrylic
Pigment Type
NA
Solvents
Acetone, Ethyl Benzene, Light Aromatic Naphtha, N-Butane, Toluene, Xylene
MIR
2.5 Max
Fill Weight
12 ounces
Recommended Dry Film Thickness
(DFT) Per Coat
1.0-2.0 mils
(25-50µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
10-12 sq.ft./can
(0.9-1.09 m
2
/can)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
15 minutes
Handle
30 minutes
Recoat
Anytime
Dry Heat Resistance
200°F (93°C)
Shelf Life
5 years
Flash Point
-141°F (-96°C)
Safety Information
For additional information, see SDS.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.