Technical Specifications

1
Form: CS973
Rev.: 052312
TECHNICAL DATA SR T -05
STOPS RUST
HAMMERED SPR A YS
DESCRIPTION AND USES
Rust-Oleum
®
Stops Rust
®
Hammered Sprays are designed to
provide a durable protective coating with excellent resistance
to rust, and excellent resistance to abrasion, fading, chipping,
and dulling. These sprays apply easily, provide excellent
coverage and dry fast to a tough attractive finish. Rust-Oleum
®
Stops Rust
®
Hammered Sprays are ideal for ferrous, non-
ferrous metal and wood surfaces. It features a comfort tip with
a wider finger pad to reduce fatigue caused by continuous
spraying and an any-angle tip which allows you to spray at any
angle. Not for use on galvanized metal.
CONDITIONS
Use outdoors or in a well ventilated area such as an open garage.
Use when temperature is between 50°F (10°C) and 90°F (32°C)
and humidity is below 65% to ensure proper drying. Do not
apply to surfaces, when heated, exceed 200°F (93°C). Do not
apply to galvanized steel. Avoid spraying in very windy and dusty
conditions. Cover surrounding area to protect from spray mist.
PRODUCT APPLICA TION
SURFACE PREP ARA TION
Remove all dirt, grease, oil, salt and chemical contaminants
by washing the surface with a commercial detergent, or other
suitable cleaning method. Rinse with fresh water and allow to
thoroughly dry. Remove loose paint and rust with a wire brush or
sandpaper. Previously coated surfaces must be sound and in good
condition. Smooth, hard, or glossy finishes should be scarified by
sanding to create a surface profile. WARNING! If you scrape, sand,
or remove old paint, you may release lead dust. LEAD IS TOXIC.
Contact the U.S.EPA/Lead Information Hotline at 1-800-424-LEAD
or log on to www .epa.gov/lead.
PRIMING
Use of a Rust-Oleum
®
primer provides superior adhesion and
hiding and is especially recommended for bare wood and metal.
The following primers are recommended.
7769 Rusty Metal Primer
7780 Clean Metal Primer
2081 Light Gray Auto Primer
2067 Red Auto Primer
2089 Dark Gray Auto Primer