Technical Specifications

TECHNICAL DATA
SRT-06
STOPS RUST
®
HAMMERED BRUSH
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 877∙385∙8155
www.rustoleum.com
Form: GDH-707
Rev.: 073119
PHYSICAL PROPERTIES
STOPS RUST HAMMERED BRUSH
Resin Type
Modified alkyd
Pigment Type
Varies with color
Solvents
Aromatic Hydrocarbons
Weight
Per Gallon
7.6-7.8 lbs
Per Liter
0.9-0.93 kg
Solids
By Weight
51.5-52.5%
By Volume
44.5-45.5%
Volatile Organic Compounds
<450 g/l (3.75 lbs./gal.)
Recommended Dry Film Thickness
(DFT) Per Coat
1.0-2.0 mils
(25-50µ)
Wet Film to Achieve DFT
2.0-4.0 mils
(50-100µ)
Practical Coverage at Recommended
DFT
75-150 sq.ft./qt.
(7.4-14.8 m
2
/l)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
30 minutes
Handle
60-90 minutes
Recoat
Within 4 hours or after 7 days
Dry Heat Resistance
200°F (93°C)
Shelf Life
5 years
Flash Point
52°F (11°C)
Safety Information
For additional information, see SDS
Calculated values are shown and may vary from the actual manufactured material.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.