Technical Specifications

Page 7/13
Safety Data Sheet
according to 1907/2006/EC (REACH), 1272/2008/EC (CLP), and
GHS
Printing date 19.09.2013
Revision: 19.09.2013
Trade name: Universal Tint Shot
(Contd. of page 6)
NIOSH approved organic vapor respirator equipped with a dust/mist prefilter should be used.
· Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recomm endation to the glove m aterial can be given for the product/ the
preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation.
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of
quality and varies from manufacturer to manufacturer. As the product is a preparation of several
substances, the resistance of the glove material can not be calculated in advance and has therefore to be
checked prior to the application.
· Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to
be observed.
· For the permanent contact gloves made of the following materials are suitable:
Butyl rubber, BR
Nitrile rubber, NBR
Neoprene gloves
· Eye protection:
Contact lenses should not be worn.
Safety glasses
·
Body protection: Protective work clothing
·
Limitation and supervision of exposure into the environment No special requirements.
·
Risk management measures No special requirements.
9 Physical and chemical properties
·
9.1 Information on basic physical and chemical properties
· General Information
· Appearance:
Form: Pasty
Colour: Black
·
Odour: Sweetish
·
Odour threshold: Not determined.
·
pH-value: Not applicable.
·
Change in condition
Melting point/Melting range: Undetermined.
(Contd. on page 8)
37.1.8