Technical Specifications

TECHNICAL DATA
5200 SYSTEM DTM ACRYLIC
Rust-Oleum Corporation Form: GDH-482
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 052417
Vernon Hills, Illinois 60061 www.rustoleum.com/industrial
An RPM Company
PHYSICAL PROPERTIES .
PREMIX COLORS
PREMIX SATIN
GLOSS/SEMI-
GLOSS TINT BASES
EGGSHELL TINT
BASES
Resin Type
Acrylic Copolymer
Pigment Type
Varies with color
Solvents
Water and Methyl Carbitol
Weight
Per Gallon
8.7-10.0 lbs.
9.7-10.4 lbs.
8.5-9.9 lbs.
9.6-11.1 lbs.
Per Liter
1.04-1.20 kg
1.16-1.24 kg
1.02-1.18 kg
1.15-1.33 kg
Solids
By Weight
36-49%
46.4-50.3%
35-45%
45-53%
By Volume
34-38%
36.3-38.3%
33-35%
36-38%
Volatile Organic Compounds
<250 g/l
(2.08 lbs./gal.)
<220 g/l
(1.83 lbs/gal.)
<250 g/l
(2.08 lbs./gal.)
<250 g/l
(2.08 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
2.0-3.0 mils
(50-75µ)
2.0-3.0 mils
(50-75µ)
2.0-3.0 mils
(50-75µ)
2.0-3.0 mils
(50-75µ)
Wet Film to Achieve DFT
5.0-9.0 mils
(125-225µ)
5.0-8.0 mils
(125-200µ)
5.0-9.0 mils
(125-225µ)
5.0-9.0 mils
(125-225µ)
Theoretical Coverage at
1 mil DFT (25µ)
545-610 sq.ft./gal.
(13.4-15.0 m
2
/l)
582-625 sq.ft./gal.
(14.3-15.4 m
2
/l)
530-560 sq.ft./gal.
(13.0-13.8 m
2
/l)
580-610 sq.ft./gal.
(14.3-15.0 m
2
/l)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
150-260 sq.ft./gal.
(3.7-6.4 m
2
/l)
165-260 sq.ft./gal.
(4.0-6.4 m
2
/l)
150-240 sq.ft./gal.
(3.7-5.9 m
2
/l)
160-260 sq.ft./gal.
(3.9-6.4 m
2
/l)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Tack-free
1-2 hours
1-2 hours
1-2 hours
1-2 hours
Handle
2-4 hours
2-4 hours
2-4 hours
2-4 hours
Recoat
1-3 hours
1-3 hours
1-3 hours
1-3 hours
Dry Heat Resistance
200°F (93°C)
Shelf Life
5 years, protect from freezing
Safety Information
For additional information, see MSDS
Calculated values are shown and may vary slightly from the actual manufactured material.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.