Installation Instructions
8
OTHER SUPPLIES NEEDED
MIX ONLY ONE POUCH
AT A TIME
A. Place tarp on the ground and thoroughly
mix the material in the pouch by shaking
and squeezing each side of the pouch. Any
clumps need to be massaged to break them
up and blend them in with the rest of the
are ready when you need them.
B. Combine the two components by placing
the pouch on the ground and rolling it from
the Part A side towards the Part B side
like a tube of toothpaste. This will create
pressure in the Part A side and force the
middle seal to burst, allowing the two
components to mix together. Thoroughly
mix the materials by shaking the pouch
back and forth and squeezing the edges
and corners towards the center of the
pouch. Mixing should be done for at least
activated and must be used within 1 hour.
ATTENTION: Each Polycuramine
™
pouch
will have a 1 hour pot life. That means
you have 1 hour to apply this product
to the concrete. Pot life will vary due to
temperature. As temperatures rise above 80
degrees pot life will be shortened.
™
(optional)
COVERAGE: The porosity of the concrete
being coated and the application technique will
Kit provides the materials generally required
to cover 125 sq. ft. of concrete. This product
woven polyamide roller
Application of this material to stairs, vertical
surfaces or to wood will have reduced
coverage rates.
Temperature Pot Life
1 hour
45 minutes
C. Once the material is thoroughly mixed,
use a scissors to cut a corner off of the
pouch. Then pour the entire contents of
the pouch into an empty bucket making
sure to squeeze the pouch to remove all
the material.
continued...
Metallic System Installation
Mixing Instructions