Installation Instructions
4
TIP: The plastic watering can is key for even
distribution of the Safe-Etch.
When the frothing stops, rinse off the solution
and move on to the next section. When all
sections are completed, rinse three times and
scrub with a stiff bristle broom while rinsing.
squeegee to push all excess water to the
dry at least 2 to 4 hours or overnight with the
door open so air will move over the surface.
TIP: In addition to a squeegee and
wet/dry vacuum, use a fan to speed up the
drying process.
this warning will create application issues and
possible product failure.
PRODUCT RETURNS:
or missing items Do Not Return To Store.
®
directly at
866-765-4474.