Installation Instructions

12
Cure Time


cure time is 8-10 hours for foot trafc,
24 hours for heavy use.
nature of vehicle tires and temperature
swings, drive on times may vary. It is
recommended to wait at least 36 hours
for vehicle trafc. Lower temperatures will
require longer cure times.
The coating will need to be dry to allow foot
optional clear

it is still tacky, as you could put permanent

Use caution tape to block off all points of entry
to avoid accidental contamination of the wet

garage doors all the way before the coating
has fully cured. The best way to test for cure
is to touch the coating in the last area that was
coated and see if it has tacked over. It should
not feel sticky to the touch and no color should

Air movement and heating the environment can
help the coating to cure faster, but be careful
when using fans to circulate air as this could
cause unwanted contaminants to get stuck in
the wet coating.
Clean Up

to local regulations. Allow unused product
to harden and dispose of according to local
regulations.
SEE WEBSITE FOR MORE INFORMATION
AND APPLICATION UPDATES.
Please contact RockSolid Floors
®
Technical Support, toll free at 866-765-4474
with any questions or concerns. Or visit us
online:
www.rocksolidoors.com.