Technical Specifications

,PHYSICAL PROPERTIES .
HIGH GLOSS
SEMI-GLOSS
FLAT
METALLIC
Resin Type
Modified alkyd
Modified alkyd
Modified alkyd
Modified alkyd
Pigment Type
Varies with color
Varies with color
412402 Carbon Black
2764402 Titanium
Dioxide
Leafing and non-leafing
aluminum
Solvents
Aliphatic
hydrocarbons
Aliphatic
hydrocarbons
Aliphatic
hydrocarbons
Aliphatic hydrocarbons
Weight
Per Gallon
7.6-8.9 lbs.
9.5-10.2 lbs.
11.2-11.4 lbs.
7.9-8.3 lbs.
Per Liter
0.9-1.1 kg
1.1-1.2 kg
1.3-1.4 kg
0.9-1.0 kg
Solids
By Weight
51-59%
61-65%
70-71%
49-51%
By Volume
42-43%
43-45%
47-48%
37-39%
Volatile Organic Compounds
<450 g/l
(3.75 lbs./gal.)
<450 g/l
(3.75 lbs./gal.)
<450 g/l
(3.75 lbs./gal.)
<500 g/l
(4.2 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
1.5-2.5 mils
†
(37.5-62.5µ)
1.5-2.5 mils
†
(37.5-62.5µ)
1.5-2.5 mils
†
(37.5-62.5µ)
470402 and 473402
1.0-1.5 mils (25-37.5µ);
1020402 and 1030402
1.5-2.5 mils (37.5-62.5µ)
Wet Film to Achieve DFT
(unthinned material)
3.5-6.0 mils
(87.5-150µ)
3.5-6.0 mils
(87.5-150µ)
3.0-5.5 mils
(75-137.5µ)
470402 and 473402
3.0-4.0 mils (75-100µ);
1020402 and 1030402
4.0-6.5 mils (100-162.5µ)
Theoretical Coverage at
1 mil DFT (25µ)
675-690 sq. ft./gal.
(16.6-17.0 m
2
/l)
690-720 sq. ft./gal.
(17.0-17.8 m
2
/l)
775-770 sq. ft./gal.
(18.5-18.9 m
2
/l)
590-625 sq. ft./gal.
(13.5-15.4 m
2
/l)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
230-390 sq. ft./gal.
(5.7-9.6 m
2
/l)
235-410 sq. ft./gal.
(5.8-10.1 m
2
/l)
255-435 sq. ft./gal.
(6.3-10.7 m
2
/l)
200-530 sq. ft./gal.
(4.9-13.0 m
2
/l)
Dry Times at 77°F
(25°C) and 50%
Relative Humidity
Tack-free
2-4 hours
2-4 hours
2-4 hours
2-4 hours
Handle
5-9 hours
5-9 hours
5-9 hours
5-9 hours
Recoat
24 hours
24 hours
24 hours
24 hours
Dry Heat Resistance
212°F (100°C)
212°F (100°C)
212°F (100°C)
350°F (177°C)*; 212°F
(100°C)**
Electrostatic Conductivity
—
—
—
50 megohms
Shelf Life
5 years
5 years
5 years
5 years
Specifications
Can be used in USDA-
regulated facilities based on
FSIS Directive11,000.4
(Rev.4), November 24,1995.
&Ag Canada acceptable
Can be used in USDA-
regulated facilities based on
FSIS Directive11,000.4
(Rev.4), November 24,1995. &
Ag Canada acceptable
Can be used in USDA-regulated
facilities based on FSIS
Directive11,000.4 (Rev.4),
November 24,1995. &
Ag Canada acceptable
Can be used in USDA-regulated
facilities based on FSIS
Directive11,000.4 (Rev.4),
November 24,1995. &
Ag Canada acceptable
Safety
Information
Contains
Lead-free
Lead-free
Lead-free
Lead-free
Warning!
COMBUSTIBLE LIQUID AND VAPOR. HARMFUL IF INHALED MAY AFFECT BRAIN OR
NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA. CAUSES
RESPIRATORY TRACT, EYE AND SKIN IRRITATION. FOR INDUSTRIAL OR
COMMERCIAL USE ONLY. KEEP OUT OF REACH OF CHILDREN. SEE THE PRODUCT
MATERIAL SAFETY DATA SHEET (MSDS) AND LABEL WARNINGS FOR ADDITIONAL
SAFETY INFORMATION.
Calculated values are shown and may vary slightly from the actual manufactured material.
*470402, 473402; **1020402, 1030402;
†
If applied over a primer or previously coated steel, a dry film thickness of 1-2 mils (25-50µ) is acceptable, 2-5 mils (50-125µ)
wet film thickness