Technical Specifications

TECHNICAL DATA
7400 SYSTEM DTM 450 VOC ALKYD ENAMEL
Rust-Oleum Corporation Form: GDH-1137
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 110816
Vernon Hills, Illinois 60061 www.rustoleum.com/industrial
An RPM Company
,PHYSICAL PROPERTIES .
HIGH GLOSS
SEMI-GLOSS
FLAT
METALLIC
Resin Type
Modified Alkyd
Modified Alkyd
Modified Alkyd
Modified Alkyd
Pigment Type
Varies with color
Varies with color
412402 Carbon Black
2764402 Titanium
Dioxide
Leafing and Non-leafing
Aluminum
Solvents
Aliphatic
Hydrocarbons
Aliphatic
Hydrocarbons
Aliphatic
Hydrocarbons
Aliphatic
Hydrocarbons
Weight
Per Gallon
7.6-8.9 lbs.
9.5-10.2 lbs.
11.2-11.4 lbs.
7.9-8.3 lbs.
Per Liter
0.9-1.1 kg
1.1-1.2 kg
1.3-1.4 kg
0.9-1.0 kg
Solids
By Weight
51-59%
61-65%
70-71%
49-51%
By Volume
42-43%
43-45%
47-48%
37-39%
Volatile Organic Compounds
<450 g/l
(3.75 lbs./gal.)
<450 g/l
(3.75 lbs./gal.)
<450 g/l
(3.75 lbs./gal.)
<500 g/l
(4.2 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
1.5-2.5 mils
†
(37.5-62.5µ)
1.5-2.5 mils
†
(37.5-62.5µ)
1.5-2.5 mils
†
(37.5-62.5µ)
470402 and 473402
1.0-1.5 mils (25-37.5µ);
1020402 and 1030402
1.5-2.5 mils (37.5-62.5µ)
Wet Film to Achieve DFT
(unthinned material)
3.5-6.0 mils
(87.5-150µ)
3.5-6.0 mils
(87.5-150µ)
3.0-5.5 mils
(75-137.5µ)
470402 and 473402
3.0-4.0 mils (75-100µ);
1020402 and 1030402
4.0-6.5 mils (100-162.5µ)
Theoretical Coverage at
1 mil DFT (25µ)
675-690 sq.ft./gal.
(16.6-17.0 m²/l)
690-720 sq.ft./gal.
(17.0-17.8 m²/l)
755-770 sq.ft./gal.
(18.5-18.9 m²/l)
590-625 sq.ft./gal.
(13.5-15.4 m²/l)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
230-390 sq.ft./gal.
(5.7-9.6 m²/l)
235-410 sq.ft./gal.
(5.8-10.1 m²/l)
255-435 sq.ft./gal.
(6.3-10.7 m²/l)
200-530 sq.ft./gal.
(4.9-13.0 m²/l)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Tack-free
2-4 hours
2-4 hours
2-4 hours
2-4 hours
Handle
5-9 hours
5-9 hours
5-9 hours
5-9 hours
Recoat
24 hours
24 hours
24 hours
24 hours
Dry Heat Resistance
212°F (100°C)
212°F (100°C)
212°F (100°C)
350°F (177°C)*; 212°F
(100°C)**
Shelf Life
5 years
5 years
5 years
5 years
Safety Information
For additional information, see SDS
Calculated values are shown and may vary slightly from the actual manufactured material.
*470402, 473402; **1020402, 1030402;
†
If applied over a primer or previously coated steel, a dry film thickness of 1-2 mils (25-50µ) is acceptable; 2-5 mils (50-125µ) wet film
thickness.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.