Technical Specifications

ManualsBrandsRust-Oleum ManualsInterior Paint & StainHigh Performance 7400 System DTM Flat Black Alkyd Enamel Paint - 1 gal.

ALKYD TECHNICAL DATA RO-10

7400 SYSTEM

DTM 450 VOC ALKYD ENAMEL

Form: GDH-1137

Rev.: 110816

.DESCRIPTION AND USES .

The 7400 System DTM 450 VOC Alkyd Enamels are designed

for indoor and outdoor steel surfaces in mild to moderate

industrial environments. Excellent resistance to general

weathering, salt air, mild chemical fumes and light abrasion.

Available in high gloss, semi-gloss, flat, and metallic finishes. Not

for use on galvanized steel.

If desired, the 7400 System DTM 450 VOC Alkyd Enamels can

be applied direct-to-metal (DTM), however optimal corrosion

protection is achieved when the finish coat is used in conjunction

with one of the recommended primers.

Semi-gloss finishes are designed for interior and sheltered

exterior surfaces only. Metallic finishes #470402 and #473402

may also be used on surfaces subject to heat in the temperature

range of up to 350°F (176°C).

The 7400 System complies with USDA FSIS regulatory

sanitation performance standards for food establishment facilities.

This coating is impervious to moisture and easily cleaned and

sanitized

MPI #9, #48, #81, #96 Certified*

.PRODUCTS .

HIGH GLOSS FINISHES

1-Gallon 5-Gallon Description

559402 — International Orange

634402 634300 High Gloss Black

717402 — Clear (Clear-Sele

)

721402 721300 National Blue

745402 — Tile Red

865402 865300 Dunes Tan

866402 — Marlin Blue

904402 — Machine Tool Gray

906402 906300 Silver Gray

925402 925300 Safety Blue

933402 — Safety Green

935402 — Vista Green

944402 944300 Safety Yellow

956402 — Safety Orange

964402 — Safety Red

975402 975300 Navy Gray

977402 — Chestnut Brown

1210402 1210300 Fire Hydrant Red

1282402 1282300 Forest Green

2766402 2766300 High Gloss White

7434402 7434300 Green (John Deere)

7446402 — Yellow

7447402 — Yellow (New Caterpillar)

7448402 — Yellow (Old Caterpillar)

1030402 — Green Aluminum

* Refer to the MPI website for the most current listing of MPI

certified products.

PRODUCTS (cont.) .

SEMI-GLOSS FINISHES

1-Gallon 5-Gallon Description

7232402 — Pleasant Green

7280402 — Light Neutral Gray

7290402 — Semi-Gloss White

FLAT FINISHES

1-Gallon 5-Gallon Description

412402 — Flat Black

2764402 — Flat White

METALLIC FINISHES

1-Gallon 5-Gallon Description

470402 — Aluminum

473402 — Heavy-Duty Aluminum

1020402 — Blue Aluminum

TINT BASES

†

1-Gallon 5-Gallon Description

7405408 — Red

7406408 — Yellow

7407408 7407388 Masstone

7408411 7408391 Deep

7409418 7409394 Light

†

All tint bases are high gloss finishes

COMPANION PRODUCTS .

RECOMMENDED PRIMERS

678402 Quick Dry Red Primer

769402 Damp Proof Red Primer

960402 Zinc Chromate Yellow Primer

1060402 Heavy-Duty Rust-Inhibitive Gray Primer

1069402 Heavy-Duty Rust-Inhibitive Red Primer

7069402 Red Shop Coat Primer

7086402 Quick Dry Gray Primer

X0060402 Zinc Chromate Red Primer

COMPATIBLE PRIMERS

1573402 Speedy Dry Enamel Rust-Inhibitive Primer

3202504 Clear-Blue Undercoat

7069402 Red Shop Coat Primer

8469402 Red Rusted Metal Primer

8492402 White Clean Metal Primer

Summary of content (3 pages)

PAGE 1
ALKYD TECHNICAL DATA RO-10 7400 SYSTEM DTM 450 VOC ALKYD ENAMEL .DESCRIPTION AND USES . PRODUCTS (cont.) The 7400 System DTM 450 VOC Alkyd Enamels are designed for indoor and outdoor steel surfaces in mild to moderate industrial environments. Excellent resistance to general weathering, salt air, mild chemical fumes and light abrasion. Available in high gloss, semi-gloss, flat, and metallic finishes. Not for use on galvanized steel.
PAGE 2
TECHNICAL DATA 7400 SYSTEM DTM 450 VOC ALKYD ENAMEL PRODUCT APPLICATION . PERFORMANCE CHARACTERISTICS SURFACE PREPARATION PENCIL HARDNESS ALL SURFACES: Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with Krud Kutter® Cleaner Degreaser, commercial detergent or other suitable cleaner. Rinse thoroughly with fresh water and allow to fully dry. All surfaces must be dry at time of application.
PAGE 3
TECHNICAL DATA 7400 SYSTEM DTM 450 VOC ALKYD ENAMEL ,PHYSICAL PROPERTIES . FLAT METALLIC Modified Alkyd Modified Alkyd Modified Alkyd Varies with color Varies with color 412402 Carbon Black 2764402 Titanium Dioxide Leafing and Non-leafing Aluminum Aliphatic Hydrocarbons Aliphatic Hydrocarbons Aliphatic Hydrocarbons Aliphatic Hydrocarbons Per Gallon 7.6-8.9 lbs. 9.5-10.2 lbs. 11.2-11.4 lbs. 7.9-8.3 lbs. Per Liter 0.9-1.1 kg 1.1-1.2 kg 1.3-1.4 kg 0.9-1.