Use and Care Manual

TECHNICAL DATA
SPC-111
RUST-OLEUM
®
OUTDOOR FABRIC PAINT
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 877∙385∙8155
www.rustoleum.com/specialty
Form: ARJ-1939
Rev.: 120219
PHYSICAL PROPERTIES
OUTDOOR FABRIC PAINT
Resin Type
Polyurethane
Pigment Type
Varies with color
Solvents
Water, Ethanol
MIR
0.3-0.5 Max
Fill Weight
12 ounces
Practical Coverage
(assumes 15% material loss)
Approximately 10 sq.ft./can
Dry Times at 77ºF
(25ºC) and 50%
Relative Humidity
Touch
1 hour
Handle
2 hours
Recoat
30 minutes
Full Cure
24 hours
Shelf Life
24 months
Flash Point
85°F (29°C)
Safety Information
For additional information, see SDS
Calculated values are shown and may vary from the actual manufactured material.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.