SDS

Date Printed: 3/5/2024
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof electrical, ventilating, lighting, or pouring equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P270 Do not eat, drink or smoke when using this product.
3. Composition / Information on Ingredients
HAZARDOUS SUBSTANCES
CAS-No. Wt.%
Range
GHS Statements
Chemical Name GHS Symbols
Asphalt 8052-42-4 50-75 Not Available Not Available
Stoddard Solvent 8052-41-3 25-50 GHS08 H304-372
Calcium Carbonate 471-34-1 1.0-2.5 Not Available Not Available
Polyethylene 9002-88-4 1.0-2.5 Not Available Not Available
n-Nonane 111-84-2 0.1-1.0 GHS07 H332
Microcrystalline Cellulose 9004-34-6 0.1-1.0 GHS06 H331
Xylenes (o-, m-, p- Isomers) 1330-20-7 0.1-1.0 GHS02-GHS07 H226-315-319-332
Crystalline Silica / Quartz 14808-60-7 0.1-1.0 Not Available Not Available
4. First-Aid Measures
First Aid - Eye Contact: No Information
First Aid - Skin Contact: No Information
First Aid - Inhalation: No Information
First Aid - Ingestion: If swallowed, get medical attention.
5. Fire-Fighting Measures
EXTINGUISHING MEDIA: Aqueous Film Forming Foam, Carbon Dioxide, Dry Chemical, Dry Sand, Water Fog
Unusual Fire and Explosion Hazards: Closed containers may explode when exposed to extreme heat due to buildup of steam.
Vapors can travel to a source of ignition and flash back. Keep containers tightly closed. Combustible liquid and vapor.
Special Fire Fighting Procedures: Water may be used to cool closed containers to prevent pressure buildup and possible
autoignition or explosion. Evacuate area and fight fire from a safe distance. Use water spray to keep fire-exposed containers cool.
Containers may explode when heated.
Special Fire and Explosion Hazard (Combustible Dust): Not a combustible dust.
6. Accidental Release Measures
Steps to Be Taken If Material Is Released or Spilled: Eliminate all ignition sources; use explosion-proof equipment. Place material in
a container and dispose of according to local, provincial, state and federal regulations. Remove all sources of ignition, ventilate area
and remove with inert absorbent and non-sparking tools.
7. Handling and Storage
Handling: Use only with adequate ventilation. Ground and bond containers when transferring material from one vessel to another.
Vapor can be ignited by static discharge.
Storage: Keep away from heat, sparks, flame and sources of ignition. Keep container closed when not in use. Avoid excess heat.
Advice on Safe Handling of Combustible Dust: No Information
Roofing / Roll Roofing Adhesive
Page 2 / 5