Use and Care Manual

TECHNICAL DATA
ROC-158
RUST-OLEUM
®
TRIPLE THICK PATCH & SEALER
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 888∙855∙1774
www.rustoleum.com/roofing
Form: ARJ-1830
Rev.: 041219
PHYSICAL PROPERTIES
TRIPLE THICK PATCH & SEALER
Resin Type
Acrylic
Pigment Type
Varies depending on color
Solvents
MEK, Methyl Acetate, Toluene
Weight
Per Gallon
6.9 lbs.
Per Liter
0.82 kg
Solids
By Weight
27%
By Volume
19%
Volatile Organic Compounds
518 g/l
Recommended Dry Film
Thickness (DFT) per Coat
4-8 mils (100-200µ) per coat (two coats are recommended)
Practical Coverage at Recommended DFT
(assume 15% material loss)
2.5-5 sq.ft./can
Dry Times at 77°F (21-
27ºC) and 50% Relative
Humidity
Touch
1-2 minutes
Recoat/Topcoat
10 minutes
Full Cure
24 hours
Shelf Life
3 years
Flash Point
-69ºF
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.