Technical Specifications

TECHNICAL DATA
ROC-166
RUST-OLEUM
®
IMAGINE
INTENSE GLITTER PAINT
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 800∙837∙8677
www.rustoleum.com
Form: ARJ-1852
Rev.: 080320
PHYSICAL PROPERTIES
IMAGINE INTENSE GLITTER PAINT
Resin Type
Acrylic
Pigment Type
Glitter
Solvents
Water
Weight
Per Gallon
8.63–8.71 lbs.
Per Liter
1.03–1.04 kg
Solids
By Weight
32.56%
By Volume
29.62%
Volatile Organic Compounds
<50 g/l
Recommended Dry Film
Thickness (DFT) per Coat
2-3 mils
Wet Film to Achieve DFT
(Unthinned material)
6-10 mils
Practical Coverage at Recommended
DFT (assume 15% material loss)
7.5 sq.ft./half pint
Dry Times at 77°F
(25ºC) and 50%
Relative Humidity
Touch
1 hour
Handle
2 hours
Recoat
2-4 hours
Full Cure
24 hours
Shelf Life
1 year
Flash Point
>200°F
Safety Information
For additional information, see SDS
Calculated values are shown and may vary from the actual manufactured material.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.