Technical Specifications

TECHNICAL DATA
SRT-29
STOPS RUST
®
UNIVERSAL BONDING PRIMER
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 866∙585∙8430
www.rustoleum.com
Form: GDH-626
Rev.: 051120
PHYSICAL PROPERTIES
STOPS RUST UNIVERSAL BONDING PRIMER
Resin Type
Acrylic
Pigment Type
Titanium Dioxide, Limestone
Solvents
Acetone, Methyl Ethyl Ketone, Methyl Isobutyl Ketone
MIR
0.70 Max
Fill Weight
12 ounces
Recommended Dry Film
Thickness (DFT) Per Coat
1.5-2.5 mils
(37.5-62.5µ)
Practical Coverage
at Recommended DFT
10-12 sq.ft./can
(0.90-1.09 m
2
/can)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
30 minutes
Handle
1 hours
Recoat
Apply a second coat or topcoat anytime
Dry Heat Resistance
200°F (93°C)
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see SDS
Calculated values are shown and may vary from the actual manufactured material.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.