TDS

TECHNICAL DATA
CHALKED ULTRA MATTE PAINT
Rust-Oleum Corporation Form: GDH-772
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 081915
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
CHALKED ULTRA MATTE PAINT
Resin Type
Acrylic
Pigment Type
Titanium Dioxide and Inerts
Solvents
Water and Glycol Ethers
Weight
Per Gallon
13.1-13.8 lbs.
Per Liter
1.6-1.65 kg
Solids
By Weight
61.0-64.0%
By Volume
39.0-40.0%
Volatile Organic Compounds
<75 g/l (0.62 lbs./gal.)
Recommended Dry Film Thickness
(DFT) Per Coat
1.0-2.0 mils
(25-50µ)
Wet Film to Achieve DFT
3.0-5.0 mils
(75-125µ)
Practical Coverage
at Recommended DFT
110-150 sq.ft./qt.
(2.7-3.7 m
2
/l)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
30 minutes
Handle
1-2 hours
Recoat
2-4 hours
Topcoat
2-4 hours
Shelf Life
3 years
Flash Point
>200°F (93°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.