Use and Care Manual

TECHNICAL DATA
METALLIC ACCENTS
Rust-Oleum Corporation Form: GDH-352
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 050316
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
METALLIC ACCENTS
Resin Type
Acrylic
Pigment Type
Varies with color
Solvents
Water, Glycols
Weight
Per Gallon
9.10-9.70 lbs.
Per Liter
1.09-1.16 kg
Solids
By Weight
30.5-35.4%
By Volume
24.4-25.5%
Volatile Organic Compounds
<300 g/l (2.50 lbs./gal.)
Recommended Dry Film Thickness
(DFT) per Coat
1.0-2.0 mils
(25-50µ)
Wet Film to Achieve DFT
(unthinned material)
3.0-6.0 mils
(75-150µ)
Theoretical Coverage at
1 mil DFT (25µ)
122-142 sq.ft./quart
Practical Coverage at Recommended DFT
(assumes 15% material loss)
50-105 sq.ft./quart
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
30 minutes
Handle
2 hours
Recoat
30 minutes
Dry Heat Resistance
200ºF (93ºC)
Shelf Life
5 years
Flash Point
>200°F (93°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we can
guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All technical
information is subject to change without notice.