Use and Care Manual

TECHNICAL DATA
CONCRETE & GARAGE FLOOR PAINT + PRIMER
Rust-Oleum Corporation Form: GDH-1355
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 051517
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
. PHYSICAL PROPERTIES .
CONCRETE & GARAGE FLOOR PAINT + PRIMER
Resin Type
Modified Acrylic Polymer
Pigments
Varies with color
Solvents
Propylene Glycol, Water
Weight
Per Gallon
9.9-10.5 lbs.
Per Liter
1.19-1.25 kg
Solids
By Weight
42.6-45.6%
By Volume
32.6-32.8%
Volatile Organic Compounds
<50 g/l (2.08 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
1.0-1.5 mils (25-37.5µ) for non-porous or smooth concrete
2.0-2.5 mils (50-62.5µ) for porous or profiled concrete
Wet Film to Achieve DFT
(Unthinned Material)
3.0-4.5 mils (75-112.5µ) for non-porous or smooth concrete
6.0-7.0 mils (150-175µ) for porous or profiled concrete
Practical Coverage at Recommended DFT
(assumes 15% material loss)
300-400 sq.ft./gal. for non-porous or smooth concrete
180-220 sq.ft./gal. for porous or profiled concrete
Dry Times at 70-80°F
(21-27ºC) and 50%
Relative Humidity
Light Foot Traffic
12-16 hours
Foot Traffic
24 hours
Vehicle Traffic
5 days
Shelf Life
5 years
Flash Point
>200°F (93°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.