Technical Specifications

TECHNICAL DATA
PTGP-05
PAINTER’S TOUCH
®
GENERAL PURPOSE
FLAT SPRAYS
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
An RPM Company
Phone: 800∙481∙4785
www.rustoleum.com
Form: ARJ-1392
Rev.: 091317
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.
PHYSICAL PROPERTIES
Painter’s Touch General Purpose Flat Sprays
Resin Type
Acrylic Modified Alkyd
Pigment Type
Varies by Color
Solvents
Acetone, Methoxy, Propyl Acetate, N-Butyl Acetate, Xylene
MIR
0.80 Max
Fill Weight
11 Oz.
Recommended Dry Film Thickness
(DFT) per Coat
1.0-2.0 Mils
Practical Coverage at
Recommended DFT (assumes 15%
material loss)
4-8 Sq. Ft.
Dry Times
at 50%
relative
Humidity
Touch
20 Minutes
Handle
2 Hours
Recoat
Before 1 Hour or After 48 Hours
Dry Heat Resistance
200°F
Shelf Life
5 Years
Flash Point
-4°F
Safety Information
For additional information, see SDS