Technical Specifications

TECHNICAL DATA
ROCKSOLID
®
NATURAL LOOK CONCRETE SEALER
Rust-Oleum Corporation Form: GDH-1336
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 041817
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
Resin Type
Acrylic
Pigment
None
Solvent
Glycol Ethers, Water
Weight
Per Gallon
8.5 lbs.
Per Liter
1.02 kg
Solids
By Weight
25.9%
By Volume
24.2%
Volatile Organic Compounds
<100 g/l (0.83lbs./gal.)
Recommended Dry Film Thickness
(DFT) per Coat
1.0-2.0 mils
(25-50µ)
Practical Coverage
at Recommended DFT
200-400 sq.ft./gal. (single coat)
Actual coverage will vary depending on the porosity of the surface
Dry Times @ 70-80º F
(21-27°C) and 50%
Relative Humidity
Touch
1 hour
Recoat
4-6 hours
Light Traffic
4-6 hours
Heavy Items
24-48 hours
Shelf Life
2 years
Flash Point
200°F (93°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.