Use and Care Manual

TECHNICAL DATA
CHALKED DECORATIVE GLAZE
Rust-Oleum Corporation Form: GDH-1280
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 020917
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
CHALKED DECORATIVE GLAZE
Resin Type
Acrylic
Pigment Type
Varies depending on color
Solvents
Water and Propylene Glycol
Weight
Per Gallon
8.6-8.7 lbs.
Per Liter
1.03-1.04 kg
Volatile Organic Compounds
<860 g/l (7.15 lbs./gal.)
Wet Film to Achieve DFT
Varies depending on surface type and porosity
Practical Coverage
at Recommended DFT
150-200 sq.ft./qt.
(13.9-18.6 m
2
/quart)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Allow Base Coat to Dry
2 hours
Allow Chalked Glaze to Dry
8 hours
Shelf Life
3 years
Flash Point
>200°F (93°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.