How to Guide

ManualsBrandsRust-Oleum ManualsCraft & Art Supplies30 oz. Chalked Aged Glaze (Case of 2)

TECHNICAL DATA CHD-13

CHALKED

DECORATIVE GLAZE

Form: GDH-1280

Rev.: 011518

.DESCRIPTION AND USES .

Rust-Oleum

Chalked Decorative Glaze allows you to add a

custom antiqued finish to any Chalked painted surface. This semi-

transparent Decorative Glaze has good workability, allowing you

to customize a handcrafted final look. Chalked Decorative Glaze

enhances the details of brush strokes, wood grain, corners,

crevices and more. Ideal for Chalked painted surfaces on wood,

laminate, melamine or metal surfaces.

For interior use only.

.PRODUCTS .

SKU DESCRIPTION

315881 Aged Glaze

315883 Smoked Glaze

.PAINTING CONDITIONS .

Apply when temperature is between 50-95ºF (10-35ºC) and

humidity is below 70% to ensure proper drying.

..PRODUCT APPLICATION .

IMPORTANT! The Chalked Decorative Glaze must be

applied over a clean, fully cured surface that has been

painted with Rust-Oleum Chalked Paint. The Chalked

Paint is fully cured in 3-4 days.

To promote a high-end finish look, a cloth such as

cheesecloth or a lint-free rag should be used to remove

portions of the Chalked Decorative Glaze. Be sure to test

glazing in a small area first before applying on the entire

project.

..PRODUCT APPLICATION (cont.) .

APPLICATION

Stir thoroughly. Do not shake the can. Thinning is not

required.

Using a 2” synthetic brush or a 2” foam brush, coat the

surface with the Chalked Decorative Glaze. Be certain to

apply the Decorative Glaze in all corners, crevices and

raised panel sections. Using cheesecloth, wipe the surface

(using varying pressure) to remove the Chalked

Decorative Glaze to a desired look. If not satisfied with the

appearance of the Decorative Glaze, while wet, lightly

wipe the surface with a clean damp cloth and repeat the

glazing process. On wood surfaces, wipe off in the

direction of the wood grain.

DRY & RECOAT

Dry and recoat times are based on 70°F (21°C) and 50%

relative humidity. Allow more time at cooler temperatures.

Let dry a minimum of 8 hours before applying Rust-Oleum

Chalked Matte Clear Protective Topcoat. The Clear coat

is optional, but highly suggested for optimal service life.

COVERAGE

Each quart covers 150-200 square feet.

CLEAN-UP

Clean brush and other and application tools with soap and

water.

Summary of content (2 pages)

PAGE 1
TECHNICAL DATA CHD-13 CHALKED DECORATIVE GLAZE .DESCRIPTION AND USES . ..PRODUCT APPLICATION (cont.) ® Rust-Oleum Chalked Decorative Glaze allows you to add a custom antiqued finish to any Chalked painted surface. This semitransparent Decorative Glaze has good workability, allowing you to customize a handcrafted final look. Chalked Decorative Glaze enhances the details of brush strokes, wood grain, corners, crevices and more.
PAGE 2
TECHNICAL DATA CHALKED DECORATIVE GLAZE PHYSICAL PROPERTIES . CHALKED DECORATIVE GLAZE Resin Type Acrylic Pigment Type Varies depending on color Solvents Weight Water and Propylene Glycol Per Gallon 8.6-8.7 lbs. Per Liter 1.03-1.04 kg Volatile Organic Compounds <860 g/l (7.15 lbs./gal.) Wet Film to Achieve DFT Varies depending on surface type and porosity Practical Coverage at Recommended DFT Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity 150-200 sq.ft./qt. (13.9-18.