Use and Care Manual

TECHNICAL DATA
980 SILICONE ROOF COATING
Rust-Oleum Corporation Form: GDH-1163
11 Hawthorn Parkway Phone: 844•888•0482 Rev.: 050417
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
980 SILICONE ROOF COATING
Resin Type
100% Silicone
Pigment Type
Titanium Dioxide
Solvents
None
Weight
Per Gallon
10.0 lbs.
Per Liter
1.46 kg
Solids
By Weight
98.0%
By Volume
97.0%
Volatile Organic Compounds
<25 g/l
Recommended Dry Film
Thickness (DFT) Per Coat
24.0 mils (600µ) for single coat application
15 mils 375µ) for multi-coat application
Wet Film to Achieve DFT
(Unthinned Material)
25.0 mils (625µ) for single coat application
16.0 mils (400µ) for multi-coat application
Practical Coverage at Recommended DFT
(assumes 15% material loss)
65 sq.ft./gal. for single coat application
100 sq.ft./gal. for multi-coat application
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
2 hours
Recoat
2-4 hours
Return to Service
24 hours
Shelf Life
2 years
Flash Point
212°F (100°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.