User Guide

TECHNICAL DATA
RSD-54
ROCKSOLID
®
PEARLESCENT
FLOOR COATING KIT
3
Form: GDH-1240
Rev.: 020119
PRODUCT APPLICATION (cont.)
COVERAGE RATE
Each Pearlescent Floor Coating Kit will cover up to 200-250
square feet. Coverage may vary based on condition and
porosity of the concrete.
DRY TIME
Temperature and humidity may affect drying time. Do not
walk on the coating while it is still tacky. Surface should be
ready for foot traffic in 8-10 hours and vehicle traffic in 24-36
hours depending upon temperature and humidity.
CLEAN-UP
Clean tools and equipment with acetone. Allow unused
product to harden in container and dispose according to
local regulations.
PRODUCT APPLICATION (cont.)
THINNING
None required
LIMITATIONS
This product must be installed at the specified spread rates
to perform as described. Do not apply in direct sunlight. Do
not apply product when the substrate and ambient
temperatures are steadily below 40°F (4°C).
SHELF LIFE and STORAGE
Sixty (60) months in factory delivered unopened pouches.
Keep away from extreme heat, cold and moisture. Maintain
at a proper storage temperature of 45-90°F. Keep out of
direct sunlight and away from fire hazards.