Specification

TECHNICAL DATA
CHALKED ULTRA MATTE SPRAYS
Rust-Oleum Corporation Form: GDH-1027
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 012516
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
CHALKED ULTRA MATTE PAINT
Resin Type
Acrylic Modified Alkyd
Pigment Type
Varies with color
Solvents
Acetone, Mineral Spirits, Naphtha
MIR
0.80 Max
Fill Weight
12 ounces
Recommended Dry Film Thickness
(DFT) Per Coat
1.0-2.0 mils
(25-50µ)
Practical Coverage
at Recommended DFT
7-8 sq.ft./can
(0.65-0.75 m
2
/can)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
20 minutes
Handle
1 hour
Recoat
Within 1 hour or after 48 hours
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.