Use and Care Manual

TECHNICAL DATA
ROC-69
510 FIBERED ALUMINUM
ROOF COATING
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 844∙888∙0482
www.rustoleum.com/roofing
Form: GDH-1162
Rev.: 092421
PHYSICAL PROPERTIES
510 FIBERED ALUMINUM ROOF COATING
Resin Type
Asphaltic Fibered Aluminum
Pigment Type
Aluminum Flake
Solvents
Mineral Spirits
Weight
Per Gallon
7.1 lbs.
Per Liter
0.85 kg
Solids
By Weight
53.0%
By Volume
54.0%
Volatile Organic Compounds
349 g/l
Recommended Dry Film
Thickness (DFT) per Coat
12.0 mils (300µ)
Wet Film to Achieve DFT (Unthinned material)
24.0 mils (600µ)
Practical Coverage at Recommended DFT
(assume 15% material loss)
50 sq.ft./gal. (1.23 m
2
/l) over metal
40 sq.ft (1.0 m
2
/l) over built-up modified bitumen roofing
Dry Times at 70-80°F
(21-27ºC) and 50%
Relative Humidity
Touch
4 hours
Weather Resistant
24 hours
Full Cure
10-12 days before final inspection can be made
Shelf Life
1 year
Flash Point
106°F (41°C)
Safety Information
For additional information, see SDS
Performance Guarantee: Should this product fail due to a defect, unless expressly agreed otherwise by Rust-Oleum in writing,
purchaser’s sole and exclusive remedy is that Rust-Oleum Corporation will, at its option, either refund to the purchaser the
amount paid for the product, or furnish at its expense sufficient product to restore a protective condition to the affected areas.
Proof of purchase must be provided. At its discretion, Rust-Oleum may require inspection of the affected areas by a Rust-Oleum
representative. Contact Rust-Oleum Product Support at 844-888-0482. Refer to product number and batch code. Please visit
rustoleum.com/roofing for further information regarding additional warranties that may be available for your roofing system.
NO OTHER WARRANTY OR GUARANTEE OF ANY KIND IS MADE BY RUST-OLEUM, EXPRESS OR IMPLIED,
STATUTORY, BY OPERATION OF LAW, OR OTHERWISE, INCLUDING BUT NOT LIMITED TO MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
Additional extended Material and Labor warranties may be available. Contact your Rust-Oleum Representative for more
information.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.