Use and Care Manual

TECHNICAL DATA
10 YEAR FIBERED ALUMINUM ROOF COATING
Rust-Oleum Corporation Form: GDH-1161
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 021617
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
10 YEAR FIBERED ALUMINUM ROOF COATING
Resin Type
Asphaltic Fibered Aluminum
Pigment Type
Aluminum Flake
Solvents
Mineral Spirits
Weight
Per Gallon
7.5 lbs.
Per Liter
0.90 kg
Solids
By Weight
53.0%
By Volume
52.0%
Volatile Organic Compounds
<467g/l (3.90 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
12.0 mils (300µ)
Wet Film to Achieve DFT
(Unthinned Material)
24.0 mils (600µ)
Practical Coverage at Recommended DFT
(assumes 15% material loss)
50 sq.ft./gal. (1.23 m
2
/l) over metal
40 sq.ft./gal. (1.0 m
2
/l) over built-up modified bitumen roofing
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
4 hours
Full Cure
24 hours
Shelf Life
1 year
Flash Point
106°F (41°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.