Use and Care Manual

TECHNICAL DATA
10 YEAR FIBERED ALUMINUM ROOF COATING
Form: GDH-1161
Rev.: 021617
2
..
PRODUCT APPLICATION (cont.)
DRY & RECOAT TIMES
Dry and recoat times are based on 70ºF and 50% relative
humidity. Dry times increase at cooler temperatures. Dries
to the touch in 4 hours and full cure in 24 hours.
Environmental or site specific conditions may require
variations in cure times.
CLEAN-UP
Wash tools and equipment with mineral spirits. Wipe up
splatters before they dry. Follow equipment
manufacturer’s directions to clean spray equipment.
Properly dispose of all soiled rags and containers.
.PRODUCT APPLICATION (cont.) .
LIMITATIONS
Do not apply when air and surface temperature is below
40°F or when rain is imminent. Not recommended for use
over tar surfaces, slate, tile, wood, shingles or where
water ponds. Do not apply over newly installed asphalt
built-up roofs without allowing the roof to weather a
minimum of 60-90 days.