Use and Care Manual

TECHNICAL DATA
FIBERED BLACK ROOF COATING
Rust-Oleum Corporation Form: GDH-1249
11 Hawthorn Parkway Phone: 844•888•0482 Rev.: 021617
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
FIBERED BLACK ROOF COATING
Resin Type
Asphalt
Pigment Type
Asphalt
Solvents
Mineral Spirits
Weight
Per Gallon
7.9 lbs.
Per Liter
0.95 kg
Solids
By Weight
72.0-76.0%
By Volume
53.0%
Volatile Organic Compounds
<250 g/l (2.08 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
30.0 mils (750µ)
Wet Film to Achieve DFT
(Unthinned Material)
56.0 mils (1,400µ)
Practical Coverage at Recommended DFT
(assumes 15% material loss)
3½ gallons per 100 square feet
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
1 hour
Topcoat
4-6 hours
Fully Cured
24 hours
Shelf Life
1 year
Flash Point
109°F (43°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.