How to Guide

TECHNICAL DATA
FROSTED GLASS SPRAY
Rust-Oleum Corporation Form: GDH-1312
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 030117
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
FROSTED GLASS SPRAY
Resin Type
Acrylic Polymer
Pigment Type
Amorphous Precipitated Silica
Solvents
Acetone, n-Butyl Acetate, Naphtha, Xylene
MIR
1.35 Max
Fill Weight
11 ounces
Recommended Dry Film Thickness (DFT)
per Coat
1.0-2.0 mils
(25-50µ)
Practical Coverage at Recommended DFT
(assumes 15% material loss)
8-12 sq.ft./can
(0.74-1.11 m
2
/can)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Recoat
Anytime
Fully Dry
5-10 minutes
Dry Heat Resistance
200ºF (93ºC)
Shelf Life
5 years
Flash Point
-141°F (-96°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.