How to Guide

TECHNICAL DATA
STONE FINISH SPRAYS
Rust-Oleum Corporation Form: GDH-1308
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 030117
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
STONE FINISH SPRAYS
Resin Type
Polyvinyl Acetate, Styrene Acrylate Copolymer
Pigment Type
Titanium Dioxide, Hectorite Clay
Solvents
Hydrotreated Light Distillate, Water
MIR
1.05 Max
Fill Weight
12 ounces
Recommended Dry Film Thickness (DFT)
per Coat
1.0-2.0 mils
(25-50µ)
Practical Coverage at Recommended DFT
(assumes 15% material loss)
8-12 sq.ft./can
(0.74-1.11 m
2
/can)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
3-4 hours
Handle
5-6 hours
Topcoat
4 hours
Dry Heat Resistance
200ºF (93ºC)
Shelf Life
5 years
Flash Point
-141°F (-96°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.