How to Guide

TECHNICAL DATA
RESTORE
®
10X ADVANCED RESURFACER
Rust-Oleum Corporation Form: GDH-686
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 042115
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
* Coverage is based on two coats.
10X ADVANCED RESURFACER
Resin Type
Water-based Acrylic Polymer
Pigment Type
Varies with color
Solvents
Glycol Ethers, Water
Weight
Per Gallon
12.5-12.7 lbs
Per Liter
1.50-1.52 kg
Solids
By Weight
65.2-67.2%
By Volume
47.9-48.9%
Volatile Organic Compounds
<50 g/l (0.42lbs./gal.)
Recommended Dry Film Thickness
(DFT) Per Coat
10 mils
Practical Coverage at Recommended
DFT
One 1-Gallon bucket will cover up to 40 square feet with two coats
One 3-Gallon bucket will cover up to 120 square feet with two coats
One 4-Gallon bucket will cover up to 160 square feet with two coats
Coverage Rate*
(2 coat application)
1 gallon: Up to 40 square feet
Coefficient of Friction
Dry: 1.09; Wet: 0.80
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
2-4 hours
Recoat
4-6 hours
Light Traffic
24 hours
Full Cure
7 days
Shelf Life
3 years
Flash Point
>200ºF (93ºC)
Storage
Protect from freezing
Safety Information
For additional information, see the MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.