Instructions / Assembly

Chalked Paint Entryway Table
TRANSFORM A WORN DRESSER, INTO AN ELEGANT ENTRYWAY TABLE
1 32
ITEMS
• Drop Cloth
• Painter’s Tape
• Lint free cloth
• Sandpaper(ne/medium)
• Dresser
• Highqualitypaintbrush
STEPS
1. PREPARE:Alwaysworkinawellventilatedarea.Covernearbyitemswithdropclothstoprotectthem
frompaintsplatters.Removehardwareandtapeoffanyareasyoudonotwishtopaint.Forbest
results,scuffsandthedresser.Wipecleanwithalintfreecloth.Tip:Removedrawersbeforepainting,
andpainteachdrawerindividually.
2. PAINT:Stirthepaintthoroughly.Useahighqualitybrushtoapplyaliberalcoattotheentiresurface.
Avoidexcessivebrushing.Onecoatisrequired,but1-2coatsisrecommendedifpaintingcontrasting
colors.Wait30minutesbetweeneachcoat.
3. FINISH:Allowyourpainttodryforapproximately24hours.Distressinglightlywithsandpaperis
optional,usenetomediumsandpaperforthis.Apply1-2coatsoftheProtectiveTopcoatforadded
durability.Addhardwareandplaceyournewpieceintheentrywayandenjoy.
ApplyRust-OleumChalkedUltraMattepainttoaddstyletoyourageddresser.Withone
coatofChalkedpaintyoucancoverthewearandtearofanolddresserandturnitinto
afashionablepiece.
Alwaysthoroughlyreviewdirectionsonthepackagebeforeusinganyproduct.
• Rust-OleumChalkedUltraMattePaint
• Rust-OleumChalkedProtectiveTopcoat
AsshownChalkedCountryGraywithMatteClearTopcoat
Visit www.homedepot.com/rustoleum
for other great ideas, products and inspiration.