How to Guide

ManualsBrandsRust-Oleum ManualsWaterproofers280886

TECHNICAL DATA ROC-31

BOOT & SHOE

WATER REPELLING TREATMENT

Form: GDH-374

Rev.: 051216

.DESCRIPTION AND USES .

Rust-Oleum

NeverWet

Boot & Shoe is a one-step,

superhydrophobic, water repelling treatment designed to

keep items dry longer. This crystal clear formula allows

fabrics to breathe, while dramatically repelling water from

the surface. NeverWet Outdoor Fabric preserves footwear

against damaging moisture without changing the look or

feel.

NeverWet Boot & Shoe is ideal for use on leather, suede,

Nubuck, canvas and more. It is suitable for use on work

boots, tennis shoes, dress and casual shoes.

. FEATURES .

 Repels water

 Breatheable

 Invisible protection

.PRODUCTS .

SKU (11 oz. spray) Description

280886 NeverWet Boot & Shoe

.SPRAYING CONDITIONS .

Use outdoors or in a well ventilated area. Use when

temperature is above 50ºF (10ºC) and humidity is below

85% to ensure proper drying. Avoid spraying in very windy

and dusty conditions.

.PRODUCT APPLICATION .

SURFACE PREPARATION

Articles must be clean and dry.

.PRODUCT APPLICATION (cont.) .

APPLICATION

Do not shake. A test spray is recommended to obtain a

feel for the spray pattern. Test in an inconspicuous area

before application for colorfastness. NeverWet Boot &

Shoe may enrich light material with a slightly darker tone.

Rotate nozzle to “ON” position. Hold the spray bottle 8-12”

from surface coating the entire boot or shoe until wet. Do

not soak or allow to puddle. NOTE: If bubbles appear,

lightly dab with a clean, lint-free rag. Re-apply seasonally

or when needed. Do not use near open flame.

DRY & RECOAT

Dry and recoat times are based on 70ºF and 50% relative

humidity and will vary depending of the fabric of the boot

or shoe. The coating will be odorless when dry. Allow to

dry for 24 hours before exposing to water.

COVERAGE

Coverage will vary depending on the fabric: 60 square feet

on smooth/light fabrics to 20 square feet on

textured/heavy fabrics.

CLEAN-UP

When finished spraying, wipe off tip before storing.

Properly discard empty container.

Summary of content (2 pages)

PAGE 1
TECHNICAL DATA ROC-31 BOOT & SHOE WATER REPELLING TREATMENT .DESCRIPTION AND USES ® . .PRODUCT APPLICATION (cont.) ® APPLICATION Rust-Oleum NeverWet Boot & Shoe is a one-step, superhydrophobic, water repelling treatment designed to keep items dry longer. This crystal clear formula allows fabrics to breathe, while dramatically repelling water from the surface. NeverWet Outdoor Fabric preserves footwear against damaging moisture without changing the look or feel. Do not shake.
PAGE 2
TECHNICAL DATA NEVERWET® BOOT & SHOE WATER REPELLING TREATMENT .PHYSICAL PROPERTIES . BOOT & SHOE WATER REPELLING TREATMENT Resin Type Acrylic Pigment Type NA Solvents Mineral Spirits Per Gallon 6.53 lbs. Per Liter 0.78 kg Weight Fill Weight 11 ounces VOC 744 g/l (6.21 lbs./gal.) Practical Coverage at Recommended DFT (assumes 15% material loss) Dry Times at 70-80ºF (21-27ºC) and 50% Relative Humidity Coverage will vary depending on fabric 60 sq.ft. on smooth/light fabrics, 20 sq.ft.