Use and Care Manual

TECHNICAL DATA
FARM & IMPLEMENT SPRAYS
Rust-Oleum Corporation Form: GDH-958
11 Hawthorn Parkway Phone: [phone] Rev.: 060217
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
Physical Properties FARM & IMPLEMENT SPRAYS
Resin Type
Oil Modified Alkyd
Pigment Type
Varies with color
Solvents
Acetone, Ethyl Benzene, N-Butyl Acetate, Xylene
MIR
0.95 Max
Fill Weight
12 ounces
Practical Coverage at Recommended
DFT (assumes 15% material loss)
Approximately 6-7 sq.ft./can
(0.54-0.63 m
2
/can
Dry Times at 70-80ºF
(21-27ºC) and 50%
Relative Humidity
Touch
2-4 hours
Handle
5-9 hours
Recoat
Within 1 hour or after 24 hours
Dry Heat Resistance
200°F (93°C)
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.