How to Guide

TECHNICAL DATA
N
RIPPLED EFFECT
Rust-Oleum Corporation Form: GDH-248
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 010816
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
RIPPLED EFFECT
Resin Type
Acrylic Lacquer
Pigment Type
NA
Solvents
Acetone, Methyl Ethyl Ketone, N-Butyl Acetate, Xylene
MIR
1.40 Max
Fill Weight
11 ounces
Recommended Dry Film
Thickness (DFT) Per Coat
1.0-2.5 mils
(25-62.5µ)
Practical Coverage at
Recommended DFT
10-11 sq.ft./can
(0.9-1.02 m
2
/can)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
5 minutes
Handle
10 minutes
Recoat
Anytime
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.