Specification
TECHNICAL DATA SS-01
SpraySmart
®
MARKING PAINT SYSTEM
Form: GDH-1152
Rev.: 051116
1
.DESCRIPTION AND USES .
SpraySmart
®
Marking Paint is a non-aerosol, propellant free
delivery system for marking paints. The marking paint is
supplied in a flexible pouch and uses a unique compression
technology device to spray the paint. The device will fit into any
existing marking wand and is powered by a rechargeable battery.
The marking process is done in the same manner as when using
a conventional aerosol marking paint and wand.
.FEATURES AND BENEFITS .
Sprays in any direction, on any substrate, and in any
weather conditions.
Designed to fully empty each paint pouch – No Waste.
The device fits existing marking paint wands.
Non-clogging spray tip.
Lightweight design – Device and pouch weigh the same as
a full 20 oz spray can.
Paint pouches are safer to transport than aerosol cans and
take up less space.
Propellant free – No disposal concerns. Empty paint pouch
can be discarded in regular trash.
The transparent pouch allows you to see the color and
amount of paint in the pouch.
Durable pouch withstands tough handling and allows for
quick color change with the device. Partially used pouches
can be stored for future use.
More linear foot coverage than the leading aerosol marking
paint.
.PRODUCTS .
SKU Description
275092 High Visibility Yellow
275089 Safety Red
278466 Caution Yellow
275086 Caution Blue
278383 APWA Alert Orange
275085 Fluorescent Orange
275088 Fluorescent Pink
275087 Fluorescent Green
278384 Fluorescent Red Orange
275090 Fluorescent Red
278382 Safety Green
278381 Safety Purple
278278 Black
278380 Silver
275091 White
275124 SpraySmart
®
Device
PACKAGING .
Paint pouch – 10.5 fl oz fill, 12 pouches per carton
Device – Self contained, rechargeable unit which
measures 2¾” diameter X 14” high. The device is supplied
with line voltage charger.
.PRODUCT APPLICATION .
SURFACE PREPARATION
ALL SURFACES: Remove loose contaminants by
sweeping the surface before application of the coating.
APPLICATION
Fully charge the device. It can take 4-6 hours to fully
charge the battery when using the line voltage charger.
The control panel on the bottom of the device will display
the level of battery change and indicator lights to show
when it is ready for use. A fully charged battery will spray
up to 48 pouches. On board electronics self monitor the
device and maintains constant spray pressure.
Open the device by unscrewing the black collar ring and
removing the top assembly.
Massage the paint pouch for 10 seconds and shake for 20
seconds before every use; then remove the valve cap on the
paint pouch.
Hold the paint pouch upright by the bottom of the valve housing.
Place the top assembly over the valve. Holding the clear inner
ring of the top assembly, twist clockwise to attach it to the paint
pouch. Insert pouch into the device and secure the top
assembly by screwing down the black collar ring onto the body of
the device until tight.
Insert the device into the marking wand and power on the
unit.
Hold unit 4-6 inches from surface and trigger to begin
spraying.
When finished, shut off the device and depressurize by
pressing the button on the side of the top assemble.
Partially used paint pouches can be saved for future use.
Replace the valve cap.