Technical Specifications

TECHNICAL DATA
PEEL STOP –
MOISTURE REPELLING TREATMENT
Rust-Oleum Corporation Form: GDH-58
11 Hawthorn Parkway Phone: 877•385-8155 Rev.: 060713
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
BASE COAT
TOP COAT
Resin Type
Hydrocarbon
NA
Pigment Type
NA
NA
MIR
1.50 Max
NA
Fill Weight
9 ounces
9 ounces
Solvents
Naphtha and Ester Solvents
Acetone
Practical Coverage at
Recommended DFT (assumes
15% material loss)
10 sq.ft./can
10 sq.ft./can
Dry Times at
77ºF (25ºC)
and 50%
Relative
Humidity
Touch
15 minutes
30 minutes
Handle
4 hours
NA
Recoat
15 minutes (with itself)
1 minute (with itself)
Dry Heat Resistance
230°F (110°C)
230°F (110°C)
Shelf Life
2 years
2 years
Flash Point
-156°F (-104°C)
-156°F (-104°C)
Safety Information
For additional information, see MSDS.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.