How to Guide

TECHNICAL DATA
UNIVERSAL FORGED HAMMERED SPRAYS
Rust-Oleum Corporation Form: GDH-143
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 081215
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
Resin Type
Modified Alkyd
Pigment Type
Varies with Color
MIR
1.9 Max
Fill Weight
12 ounces
Solvents
Acetone, Ketone Blend
Recommended Dry Film Thickness
(DFT) per Coat
1.0-2.0 mils
(25-50µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
10-15 sq. ft./can
(0.9- 1.4 m
2
/can)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
30 minutes
Handle
1 hour
Recoat
30 minutes to 2 hours or after 7 days after applying first coat
Dry Heat Resistance
200ºF (93ºC)
Shelf Life
5 years
Flash Point
-156ºF (-104ºC)
Safety Information
For additional information, see SDS.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this
literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our
control, we can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective
materials. All technical information is subject to change without notice.