How to Guide

TECHNICAL DATA
SPECIALTY HIGH HEAT ULTRA
Rust-Oleum Corporation Form: GDH-512
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 092816
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
HIGH HEAT ULTRA
Resin Type
Modified Silicone
Pigment Type
Black Manganese Ferrite, Chromite Black
Solvents
Acetone and Aromatic Hydrocarbons
MIR
1.20 Max
Fill Weight
12 ounces
Recommended Dry Film Thickness
(DFT) per Coat
1.0-2.0 mils
(25-50µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
7.0-8.0 sq.ft./can
(0.63-0.72 m
2
/can)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
30 minutes
Handle
1-2 hours
Recoat
Within 1 hour or after 48 hours
Full Cure
Allow paint to dry 1 hour before heating
Dry Heat Resistance
1200°F (648°C)
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Warning!
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.