Use and Care Manual

TECHNICAL DATA
ACRYLIC POOL PAINT
Rust-Oleum Corporation Form: GDH--1047
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 052318
Vernon Hills, Illinois 60061 www.rustoleum.com/industrial
. PHYSICAL PROPERTIES .
Calculated values are shown and may vary slightly from the actual manufactured material.
*Coverage rate may be less on bare concrete and will vary depending on the texture and porosity of the concrete
Acrylic Pool Paint
Resin Type
Modified Acrylic
Pigment Type
Varies with color
Solvents
Water, Glycol Ethers
Weight
Per Gallon
11.6-12.0 lbs.
Per Liter
1.40-1.44 kg
Solids
By Weight
53.0-55.0%
By Volume
34.0-36.0%
Volatile Organic Compounds
<207 g/l (1.72 lbs./gal.)
Practical Coverage
(assume 15% material loss)
230-460 sq.ft./gal.*
(5.6-11.3 m
2
/l)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Tack Free
6-8 hours at 70°F (21°C)
Handle
6-12 hours at 70°F (21°C)
Recoat
Anytime after 4 hours at 70°F (21°C)
Return to Service
3 days for outdoor pools, 6 days for interior pools
Shelf Life
5 years
Storage
Protect from freezing
Safety Information
For industrial or commercial use only. Refer to the Safety Data Sheet (SDS)
for additional information.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.