MSDS

265053 R-O QT KIT 2PK PATCH AND CRACK FILLER Page 3 of 5

Section 7 – Handling and Storage

Handling: Prevent inhalation of dust and contact with skin and eyes. Clean hands thoroughly after handling.

Precautions also apply to emptied containers. Personal protective equipment must be worn during maintenance or

repair of contaminated mixer, reactor, or other equipment.

Storage: Store in sealed containers in a cool, dry, ventilated warehouse location.

Section 8 – Exposure Controls / Personal Protection

Engineering Controls: Use only in well ventilated areas. Provide maximum ventilation in enclosed areas. Use

process enclosures, local exhaust ventilation, or other engineering controls to maintain dust levels below

recommended exposure limits.

Respiratory Protection: A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2

requirements must be followed whenever workplace conditions warrant a respirator's use.

Skin Protection: Nitrile or Neoprene gloves may afford adequate skin protection. Use gloves to prevent prolonged

skin contact.

Eye Protection: Use safety eyewear designed to protect against splash of liquids.

Other protective equipment: Refer to safety supervisor or industrial hygienist for further information regarding

personal protective equipment and its application.

Hygienic Practices: Wash thoroughly with soap and water before eating, drinking, or smoking.

Section 9 – Physical and Chemical Properties

Vapor Density N.A. Odor: None

Appearance: Gray Powder Evaporation Rate: N.A.

Solubility in Water: Insoluble Freeze Point: N.A.

Specific Gravity: 2.8 pH: N.A.

Physical State: Solid Percent Volatiles 0

Section 10 – Stability and Reactivity

Conditions To Avoid: Avoid contact with strong acids and strong bases.

Incompatibility: Incompatible with strong oxidizing agents, strong acids and strong alkalis.

Hazardous Decomposition: When heated to decomposition, it emits acrid smoke and irritating fumes.

Hazardous Polymerization: Will not occur under normal conditions.

Stability: This product is stable under normal storage conditions.

Section 11 – Toxicological Information

Chemical Name LD