How to Guide

TECHNICAL DATA
– TRIPLE
TRIPLE THICK GLAZE
Rust-Oleum Corporation Form: GDH-448
11 Hawthorn Parkway Phone: 800•481-4785 Rev.: 070816
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
Physical Properties
TRIPLE THICK GLAZE
Resin Type
Acrylic
Pigment Type
NA
Solvents
Acetone, Toluene, Ethyl 3-Ethoxypropionate
MIR
1.40 Max
Fill Weight
12 ounces
Wet Film to Achieve DFT
2 wet coats
Practical Coverage at Recommended
DFT (assumes 15% material loss)
10-12 sq.ft./can.
(0.9-1.1 m
2
/can)
Dry Times at 70-80ºF
(21-27ºC) and 50%
Relative Humidity
Touch
5 minutes
Handle
20 minutes
Fully Dry
24 hours
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.